Home Products News Contact About
   

CATEGORIES

  SPECIALS

  Amplification (amps, receivers, etc)

  Display products (TV, Plasma, LCD,etc)

  Source products (DVD,CD,settop boxes etc)

  Speakers and subwoofers

  Furniture - racks, brackets etc


QUICK SEARCH

  Advanced search




AVR2805 Denon AVR2805 receiver

Denon AVR2805 receiver

Switch images 1 2 3

The AVR-2805 is Denon’s latest addition of versatile A/V Receivers which incorporate all current surround formats and enhanced installation flexibility.

 ·         Finest DSP employed for faster processing better sound quality

AVR-2805 features latest generation 32bit floating point DSP to decode all current surround formats, 96kHz signals and also processing room equalization.  This DSP’s processing power allows even the analogue input signals in all surround modes to be handled at 96kHz, which undoubtedly assures never-before-experienced high quality.

·         Various Decoding

DTS 96/24 Decoding for DVD-Video/ DTS-ES Discrete 6.1 and Matrix 6.1

DTS NEO:6/ Dolby Digital EX/ Dolby ProLogic IIx
 ·         Fully Discrete, Equal Power Seven Amplifier Channels, 100 Watts Each

Front ..................... 100 W + 100 W (8 ohms, 20Hz - 20kHz, 0.05% THD)

Center................... 100 W (8 ohms, 20Hz - 20kHz, 0.05% THD)

Surround............... 100 W + 100 W (8 ohms, 20Hz - 20kHz, 0.05% THD)

Surround Back ..... 100 W + 100 W (8 ohms, 20Hz - 20kHz, 0.05% THD) The AVR-2805 features an equal power 7-channel amplifier section, with identical amplifier design and high current discrete output devices on all 7 channels. Each of the 7 amplifier channels is rated at 100 watts, into 8 ohms, from 20 Hz - 20 kHz with no more than 0.05% THD.

Video Up Conversion

This video conversion technology lets you enjoy the highest picture quality from all video sources connected to the AVR-2805. Since composite and S-video signals are converted up to component video signals and output to the monitor, this allows you to connect all your video sources to a monitor using only one cable.

·         Down Conversion from S-Video to Composite

·         3 Sets of Component Video Inputs

The AVR-2805 is equipped with 3 sets of assignable, component video inputs and 1set of monitor outputs with on screen display.
·         High Definition Quality Video Switching.The high-performance relay that is used to switch component video signals, features an extended bandwidth range up to 100 MHz.

Auto Setup and Auto Room EQ Function with Microphone

The AVR-2805 is equipped with an Auto Setup and Room Equalization function, to achieve the most ideal sound field for your room. With the accompanying microphone placed at your listening position, the powerful new 32bit floating point DSP automatically and accurately analyzes, adjusts and sets the speaker configurations of your system. Also, the AVR-2805 analyzes and adjusts the frequency response of the speakers to the room with an 8 band parametric equalizer. The microphone (DM-S305) is a especially designed, high performance unit with a heavy duty base to suppress vibrations for accurate analyzing.

·         Room EQ Memory

The AVR-2805 provides for a maximum of 4 equalizing curves called “normal”, “front”, “flat” and “manual” to be stored into memory. Normal, front and flat are automatically memorized during the ‘Auto Room EQ’ Setup, allowing you easy selection of your favorite EQ curve without having to run ‘Auto Setup’ again.

·         Assignable Room EQ

The AVR-2805 permits assigning of an EQ curve for each surround mode as well as selecting the EQ to be ‘On’ or ‘Off’ for the Direct/Pure Direct modes.

Support for Multi Zone Configurations

·         ZONE2 audio capability

The AVR-2805 provides a Multi Zone Output function and a Select function that let you output different sources to multiple zones. Sources can be selected for output to an additional zone, in addition to the main room. Multi-room Zone 2 can have variable pre-amp output along with composite video feed.

·         ZONE2 composite video output capability

·         Powered Zone2

The AVR-2805’s Power Amplifier Assign function lets you assign the 2 Surround Back (SB L/R) amplifier channels when the system is not configured for 7.1, to instead drive the Multi-room Zone 2 speakers, with 100 Watts per channel output power, while still providing 5 discrete amplifier channels to drive all speakers in a 5.1 configured home theater room.

·         RS232C Control Port to support an AMX,

Crestron integrated control system

• +12 V Trigger Output x 2 (Asignable to Input source and ZONE2 source)

·         Remote In/Out Ports

 

Features That Enhance Operating Ease

·         Auto Surround

The AVR-2805 can automatically store the surround mode for any of three inputs signals: (1)Analog and PCM 2 channel, (2)Bit stream 2-channel (DolbyDigital, DTS) and (3)Bit stream multi-channel.If the type of input signal changes, the most appropriate surround mode is automatically selected for the signal.

·         New Front Panel Design with Larger Display

Larger display area is now capable of displaying a broad range of information including character icons for an intuitive recognition of input signal channels and output speaker channels.

·         Audio Delay Function

The Audio Delay function corrects slight lags between sound and picture that can occur when a video signal is processed,such as in a Progressive Scan DVD player or outboard video processor.

·         Adjustable Cross-Over Switching

The AVR-2805 supports subwoofer cross-over switching with a choice of 8 cross-over frequencies: 40, 60, 80, 100, 120, 150, 200 and 250 Hz. This lets you more accurately match the performance characteristics of the subwoofer to the main speaker system.

·         A/B switching between front speakers

·         Pre-programmed remote controller with learning feature and GLOW Keys

Designed for high sound quality

·         Pure Direct and AL24 Processing

DENON’s Pure Direct mode was designed for those who want the ultimate in sonic quality from their audio sources. Depending on input signal type, Pure Direct will turn off any unneeded circuitry of the AVR-2805.

·         When listening to PCM based sources, DENON’s waveform technology

AL24 Processing brings out all the delicate nuances of the source material.

·         Hefty Power Transformer for Stable Supply of Power

A huge power transformer has been connected in the power section where it is combined with a rectifier diode and an oversized block capacitor to ensure a large, stable supply of electrical current. Accordingly, this design allows the AVR-2805 to achieve high output power of 100 W for each of the 7 channels.

·         Variable Gain Volume

S/N in the usable area has been improved. Finer adjustments are also possible in 0.5 dB steps across the extended range of –80 dB to +18 dB.

·         Block Capacitor

A large-capacity block capacitor was developed for the AVR-2805 to ensure a rock stable supply of power.

·         Detachable AC Power Cord

Input/Output Terminals For Every A/V System

·         Audio Inputs

11 Sets Analog Input .................. PHONO, CD, (TUNER), DVD, VDP,TV,DBS, VCR-1, VCR-2, V.AUX(FRONT),CDR/TAPE

1 Set 8-ch Analog EXT. Input ..... FRONT L/R, CENTER,

SURROUND L/R, SURROUND BACK L/R,SUBWOOFER

5 Sets Digital (Optical) Input ....... OPTICAL x 5(FRONT x 1) (Assignable)

2 Set Digital (Coaxial) Input ........ COAXIAL x 2 (Assignable)

·         Audio Outputs

8 Sets Analog PRE Output ......... FRONT L/R, CENTER,

SURROUND L/R, SURROUND BACK L/R,

SUBWOOFER

3 Sets Analog REC Output ......... VCR-1, VCR-2, CDR/TAPE

1 Set Analog Multi Zone PRE Output... ZONE2 L/R

2 Set Digital (Optical) Output ...... OPTICAL x 2

·         Video Inputs

3 Sets Component Video Input .. VIDEO-1, VIDEO-2, VIDEO-3 7 Sets S-Video Input .................. DVD, VDP, TV, DBS, VCR-1, VCR-2, V.AUX(FRONT)

7 Sets Composite Input .............. DVD, VDP, TV, DBS, VCR-1, VCR-2, V.AUX(FRONT)

·         Video Outputs

1 Set Component Video Output . MONITOR

3 Sets S-Video Output ................ VCR-1, VCR-2, MONITOR

3 Sets Composite Output ........... VCR-1, VCR-2, MONITOR

1 Multi Zone Composite Video output...... ZONE2 VIDEO x 1

Specifications

�� Power Amplifier Section

Rated output *THD figures are power amp stage values.

Front............................................. 100 W + 100W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)

135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)

Center.......................................... 100W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)

135 W (6 ohms, 1 kHz, 0.7 % THD)

Surround..................................... 100 W + 100W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)

135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)

Surround Back........................... 100 W + 100W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)

135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD)

�� Preamplifier Section

Analog

Input sensitivity / impedance ................. 200mV/47kohms

Frequency response ............................. 10Hz-100kHz(+0,-3dB direct mode)

S/N ........................................................ 102dB(direct mode)

Rated output.......................................... 1.2V

Digital

D/A output ............................................. 2.0V

Phono

Input sensitivity / impedance ................ 2.5mV

RIAA deviation ...................................... +/-1dB(20Hz to 20kHz)

Rated output.......................................... 150mV

�� Video Section

Frequency response

Composite video/S-video ..................... 5Hz-10MHz(+0,-3dB)

Component video ................................. DC-100MHz(+0,-3dB)

�� FM Section

Tuning frequency range .................... 87.5 - 108.0 MHz Usable sensitivity .............................. 1.0 µV (11.2 dBf)

�� AM Section

Tuning frequency range .................... 522 - 1611 kHz

Usable sensitivity .............................. 18 µV

�� General

Power supply......................................... AC230V,50Hz

Power consumption............................... 290 W (1W max at standby mode)

 Dimensions ........................................... 434 (W) x 171 (H) x 429 (D) mm

Weight ................................................... 13.5kg Front panel with cap for front A/V input

 

 



Price  $1699.00





Email to a friend
Add to wish list